The Slab Hi Wall

The Slab range of gas fires is designed to give you the widest possible installation options and flexibility. There are three main installation requirements; a gas supply, a suitable flue and an appropriate fireplace opening (this can be altered if required to enable the product of your choice to be installed).

A clean lined Corian fireplace inspired by the qualities of a single, solid mass of material. Wall has a high quality satin stainless steel firebox with a 100mm deep Corian surround, offering minimal projection into the room with maximum impact. With no need for a floor hearth this fireplace enhances the natural lines of a room while making the fire feel closer.

Product Options

Gas Fuel Effect Options

Driftwood	Charcoal	Pebble
Driftwood fire Pebble edge	Charcoal fire Pebble edge	Coal fire Pebble edge

Control Options

	Gas Manual The Slab Wall is fitted as standard with a manual control positioned under the raised hearth for easy access
	Gas Battery Remote As an upgrade, a fully automatic, battery operated remote control is available. This sophisticated system includes Automatic pilot ignition and variable high to low adjustment.

Vent Options

	Customer Own Vent To conform with current CORGI regulations this fireplace must be installed in a room with adequate ventilation. Your installer must ensure correct ventilation and if necessary will supply one.
	Glass Canopy Alternatively, a glass canopy can be supplied which negates the need for an air vent whilst still meeting CORGI regulations.

Product Specifications

The Slab range of gas fires is designed to give you the widest possible installation options and flexibility. There are three main installation requirements; a gas supply, a suitable flue and an appropriate fireplace opening (this can be altered if required to enable the product of your choice to be installed) for further information see Help

All Slab electric fires require a 13amp 240 volt mains supply and can be installed by a competent builder or tradesperson. The electric fires have 165mm deep opening requirement and can be recessed into a cavity wall(by removing the inner leaf of brickwork), fixed into an existing chimney breast, or installed into a false stud-wall chimney breast.